CONTROLS AND FUNCTIONS
10
En
This section describes the function of each button on the
Zone 2 remote control, which is used to control Zone 2.
The Zone 2 remote control comes with a battery already installed.
Before using the Zone 2 remote control for the very first time,
pull out the insulation sheet, as shown.
■
Common controls for Zone 2
The following buttons can be used no matter which input
source is selected for Zone 2.
1
Infrared signal transmitter
Sends infrared signals.
2
A
(Zone 2 standby)
Sets Zone 2 to standby mode.
3
(Zone 2 on)
Turns on Zone 2.
4
ID
Changes the Zone 2 remote control ID (see page 44).
5
Zone 2 input selector buttons
Selects the desired input source for Zone 2.
6
MUTE
Mutes the sound output to Zone 2. Press again to restore
the sound output to the previous volume level.
7
/–
Increases or decreases the sound output level of Zone 2.
■
SIRIUS and FM/AM controls
The following buttons can be used when SIRIUS or
TUNER is selected as the input source for Zone 2.
8
FM/CATEGORY
l
, AM/CATEGORY
h
Sets the FM/AM tuner band to FM or AM when TUNER
is selected as the input source (see page 20).
Selects a channel category when SIRIUS is selected as the
input source (see page 29).
9
PRESET
j
/
i
Selects a preset FM/AM station when TUNER is selected
as the input source (see page 24).
Selects a preset SIRIUS channel when SIRIUS is selected
as the input source (see page 31).
0
TUN./CH
jj
/
ii
Selects the tuning frequency when TUNER is selected as
the input source (see page 20).
Searches for a SIRIUS channel when SIRIUS is selected
as the input source (see page 29).
A
Numeric buttons, ENTER
Specifies the frequency or the preset number of the FM/
AM station when TUNER is selected as the input source
(see page 21).
Specifies the channel number or preset number of the
SIRIUS channel when SIRIUS is selected as the input
source (see page 30).
■
iPod controls
The following buttons can be used when DOCK is
selected as the input source for Zone 2, for listening to an
iPhone/iPod. For more information, see page 35.
B
MENU/
Ee
/
b
/
a
/ ENTER
C
/
Zone 2 remote control (R-S700 only)
Note
Insulation sheet
