5
En
Controls and functions
English
IN
TR
ODUCTION
D
PHONES jack
Outputs audio to your headphones for private listening.
E
YPAO MIC jack
For connecting the supplied YPAO microphone (p. 42).
F
SPEAKERS A/B
Turns on or off the speaker set connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel each time the corresponding button is pressed.
G
USB jack
For connecting a USB storage device (p. 39).
H
INPUT selector
Selects the input source you want to listen to.
I
BASS control
Increases or decreases the low frequency response. The
center position produces a flat response (p. 23).
J
TREBLE control
Increases or decreases the high frequency response. The
center position produces a flat response (p. 23).
K
BALANCE control
Adjusts the sound output balance of the left and right
speakers to compensate for sound imbalances caused by
speaker locations or listening room conditions (p. 23).
L
LOUDNESS control
Retains a full tonal range at any volume level (p. 24).
Note
The LOUDNESS control does not function when the YPAO
Volume function (p. 50) is enabled.
M
SELECT/ENTER
Turn the dial to select a numeric value or setting, and press
the dial to confirm.
N
RETURN
Returns to the previous indication of the front display.
CONNECT
Use to register this unit to the MusicCast network (p. 20).
O
VOLUME control
Increases or decreases the sound output level.
VOLUME
PURE DIRECT
RETURN
CONNECT
PUSH - ENTER
TUNING
PRESET
BAND
MEMORY
CLEAR
BASS
INPUT
5V
1A
BALANCE
L
R
TREBLE
LOUDNESS
FLAT
-30dB
DIMMER
MODE
DISPLAY
SELECT
PHONES
YPAO MIC
SPEAKERS
USB
A
B
O
J
I
H
F
E
D
K
L
M
N
G
