44
En
Configuring various functions (Setup menu)
Configures the network settings.
■
Connection
Selects the network connection method.
■
Information
Displays the network information on the unit.
■
IP Address
Configures the network parameters (such as IP address).
DHCP
Select whether to use a DHCP server.
Manual network settings
1
Set “DHCP” to “Off”.
2
Use the cursor keys (
B
/
C
) to select a
parameter type.
3
Use the cursor keys (
D
/
E
) to select the edit
position.
(Example: IP address setting)
Use the cursor keys (
D
/
E
) to switch between
segments (Address1, Address2...) of the address.
4
Use the Cursor keys (
B
/
C
) to change a
value.
5
To exit from the menu, press SETUP.
■
DMC Control
Selects whether to allow DLNA-compatible Digital Media
Controller (DMC) to control playback.
y
A Digital Media Controller (DMC) is a device that can control
other network devices through the network. When this function is
enabled, you can control playback of the unit from DMCs (such
as Windows Media Player 12) on the same network.
■
Standby (Network Standby)
Selects whether the unit can be turned on from other
network devices (network standby).
Network
Wired
Select this option when you want to connect
the unit to a network with a commercially-
available network cable (p. 15).
Wireless
Select this option when you want to connect
the unit to a network via the wireless router or
access point (p. 16, 17, 18).
WirelessDirect
Select this option when you want to connect a
mobile device to the unit directly. For details
on settings, see “Connecting a mobile device
to the unit directly (Wireless Direct)” (p. 19).
Extend
Displays connection method of the MusicCast
Network.
NewFwAvailable
Appears if an update for this unit’s firmware is
available (p. 49).
STATUS
The connection status of the network.
MC NET
Status of the MusicCast Network. If “Ready”
appears, you can use the MusicCast
CONTROLLER app.
MAC
Displays MAC address of the unit. MAC
address will vary depending on the connection
method (wired LAN connection or wireless
LAN / Wireless Direct connection).
SSID
(When using wireless LAN connection or
Wireless Direct ) The SSID of this unit on the
wireless network.
IP
IP address
SUBNET
Subnet mask
GATEWAY
The IP address of the default gateway
DNS P
The IP address of the primary DNS server
DNS S
The IP address of the secondary DNS server
VTUNER
The ID of the Internet radio (vTuner)
Off
Does not use a DHCP server. Configure the
network parameters manually. For details, see
“Manual network settings”.
On (default)
Uses a DHCP server to automatically obtain the
unit’s network parameters (such as IP address).
IP
Specifies an IP address.
SUBNET
Specifies a subnet mask.
GATEWAY
Specifies the IP address of the default gateway.
DNS P
Specifies the IP address of the primary DNS
server.
DNS S
Specifies the IP address of the secondary DNS
server.
Disable
Does not allow DMCs to control playback.
Enable
(default)
Allows DMCs to control playback.
Off
Disables the network standby function.
On
Enables the network standby function. (The unit
consumes more power than when “Off” is
selected.)
Auto
(Default)
Enables the network standby function.
The unit is set to the power saving mode when the
unit is disconnected from the network.
Address1•••192
NETWORK
A
