Firmware Update Procedure for R-N500
IMPORTANT NOTICE
Follow the instructions carefully and do not attempt any other procedures not specified in the instructions
provided by Yamaha.
Improperly updated products may cause improper operation, and any parts or service required to restore
proper operation will not be covered under the Yamaha Limited Warranty.
Choose from the following 2 methods to update to the latest firmware.
Click here for
Firmware Update Through the Internet
(Connection to the Internet is required)
(A USB thumb drive is required)
In case of error, see the
[ 1. Firmware Update Through the Internet ]
Requirements:
Your R-N500 is connected to the Internet if you can receive
Internet radio stations. (See owner
’
s manual for details)
STEP 1
Turn off the unit.
STEP 2
While holding down
RETURN
on the front panel, press power.
STEP 3
“
ADVANCED SETUP
” will be shown for seconds.
STEP 4
Rotate
SELECT/ENTER
to select firmware update mode as shown below.
RETURN
SELECT/ENTER
POWER
DISPLAY
DIMMER
