Yamaha R-N303 Owner'S Manual Download

Page: 35 / 65

Playing back music via Bluetooth

English

OPERA

ION

Operate the

Bluetooth

device to establish a

Bluetooth

connection.

Select the unit’s model name from the

Bluetooth

device list on your device.
When a connection is established, BLUETOOTH
indicator on the front display will light up.

Note

If you cannot connect the

Bluetooth

device, please perform

pairing again (p. 30).

Operate the

Bluetooth

device to play back

music.

Note

You can use the playback keys on the remote control to control
playback.

Disconnecting a Bluetooth
connection

Follow one of the procedures below to disconnect a

Bluetooth

connection.

• Turn off the

Bluetooth

function on the

Bluetooth

device.

• Hold down BLUETOOTH on the remote control for at

least 3 seconds.

• Set the input on this unit to anything except for

“

Bluetooth

”.

Bluetooth

•

Bluetooth

is a technology for wireless communication

between devices within an area of about 10 meters (33 ft)

employing the 2.4 GHz frequency band, a band which can

be used without a license.

Handling

Bluetooth

communications

• The 2.4 GHz band used by

Bluetooth

compatible devices is

a radio band shared by many types of equipment. While

Bluetooth

compatible devices use a technology minimizing

the influence of other components using the same radio

band, such influence may reduce the speed or distance of

communications and in some cases interrupt

communications.

• The speed of signal transfer and the distance at which

communication is possible differs according to the distance

between the communicating devices, the presence of

obstacles, radio wave conditions and the type of equipment.

• Yamaha does not guarantee all wireless connections

between this unit and devices compatible with

Bluetooth

function.

Summary of Contents for R-N303


































































Search results

Summary of Contents for R-N303

Reviews:

Related manuals for R-N303

Brands by name

Popular brands

Yamaha R-N303, Owner'S Manual

Search results

Summary of Contents for R-N303

Reviews:

Related manuals for R-N303

Brands by name

Popular brands