Yamaha R-N2000A, User Manual

Page: 12 / 150

NAMES OF PARTS AND THEIR FUNCTIONS
Unit
Front panel
The following are the names of parts on the front of the unit and an explanation of their functions.
PHONES
YPAO MIC
SPEAKERS
METER INPUT BASS TREBLE BALANCE LOUDNESS
VOLUME
FLAT
-30dB
PURE DIRECT
PRESET
RETURN
CONNECT
PUSH - ENTER
SELECT
LEFT
-50 -40 -30 -20 -10 -0 +6
0.01 POWER
OFF
PEAK
VU
DIMMER
dB
0.1 1 10 100 W/8
RIGHT
-50 -40 -30 -20 -10 -0 +6
0.01 POWER
dB
0.1 1 10 100 W/8
L R
f e d r g i o q s t p jk l m n
c a b
h
a z
(Power) Switch/Indicator
Turns this product ON/OFF (p.39).
When the switch is up:
The power is ON or in Standby. Pressing the
z
AMP key on the remote control switches the power between ON and
Standby. This product also goes into Standby in the following situations.
(
When the Auto Power Standby function is activated (p.105)
When the switch is down:
The power is OFF. This product cannot be operated with the remote control. This product cannot also be linked with
a Bluetooth device, a network device, or MusicCast Controller App.
The indicator lights up as follows according to the state of power.
Power ON: Indicator lights up.
Power in Standby: Indicator is faintly lit.
Power OFF: Indicator is off.
NOTE
When the indicator is flashing, it means the protective circuit has been activated and the power will not turn ON, in order to
protect the product. Please contact an authorized Yamaha service center to have it repaired.
b
LEFT/RIGHT Meters
These indicate the audio output levels for the LEFT & RIGHT channels.
12
NAMES OF PARTS AND THEIR FUNCTIONS > Unit