Yamaha QY700, Owner'S Manual, Page: 79 / 334

78 Chapter 2. SONG MODE
10. Loop switch; locations 1 and 2
• Set the loop feature ON when you want to repeatedly play a
specific area of the selected song.
• When loop play is in effect, locations 1 and 2 set the start
and end points of the loop (by measure number). Even when
loop play is not in effect, you can jump to location 1 or 2 at
any time by pressing
1
or
2
, respectively.
0101
1101
Loop on
LOOP
Loop off
OFF
Locations 1/2
001,...,999
1. Press
d
[D2] as necessary to move the cursor to
the loop-switch area or either of the location values.
2. Switch the value using the data dial or
n
/
y
.
• To set location 1 or 2 equal to the value of the current meas-
ure, hold down
s
and press
1
or
2
.
11. Tempo and meter
• The tempo value sets the tempo for recording or playback
of the song.
• Each song stores its own tempo value.
• The meter setting area shows the meter for the current meas-
ure.
0101
1101
Tempo
25.0,...,300.0 (=
q
)
Meter View only
1. Press
d
[D3] to move the cursor to the tempo
area.
2. Set the appropriate value using the data dial,
n
/
y
,
or the numeric keypad.
• The meter values are set in Song Recording. (
→
p.111)
12. Click mode, click beat, and count
• These parameters set up the sequencer’s click sound.
•
The beat value sets the click interval.
• The mode setting determines when the click feature is
used.
• The count value sets the number of preliminary meas-
ures used at start of realtime recording.
0101
1101
Click mode:
Off
Disables the click feature.
Rec
Use click for realtime and punch recording only.
Ply
Use click for realtime recording, punch recording,
and playback.
All
Always use click.
Click beat:
x
,
e
,
q
,
h
,
w
Count:
Off, 1,...,8Ms
1. Press
d
[D4] as necessary to move the cursor to
the appropriate click parameter.
2. Set the value using the data dial or
n
/
y
.
1. SONG PLAY