manualshive.com logo in svg

Yamaha QY700, Owner'S Manual, Page: 52 / 334

Share
Download
Yamaha QY700 Owner'S Manual Download Page 52

51

BASIC CONCEPTS

Chapter 1

1

8. Basic operation

•

When you press a mode key, the mode indicator above that
key will light.

•

It is not possible to switch modes during recording.

Selecting sub-modes

•

This refers to moving within a mode to a sub-mode.

•

To select sub-modes, use the following keys.

1   

–

6

•

These keys will select the sub-modes which are displayed
in the key line of each mode. For details refer to the Func-
tion Tree (

→

 p.34).

e

•

In Song mode this key selects Song Edit. In Pattern mode
this key selects Phrase Edit.

j

•

In Song mode this key selects Song Jobs. In Pattern mode
this key selects Pattern Jobs.

e

•

In Song mode this key selects Song Recording. In Pattern
mode this key selects Phrase Recording.

Selecting pages

•

This refers to changing pages within the sub-mode.

•

To select pages, use the function keys that correspond to
the tab menu.

1. Moving the cursor

•

You will notice a black, highlighted location in the display.
This is referred to as the cursor, and the location of the cur-
sor will be the currently-selected command or data.

•

Use the cursor keys to move the cursor.

•

The direction(s) in which the cursor will move is fixed for
each screen, and the cursor will not move to locations other
than this.

•

If the cursor does not move as you expect, try moving it in
a different direction.

•

The cursor will not move to commands or data which can-
not be set.

2. Moving to modes, submodes, and pages

Selecting modes

•

This refers to switching between Song mode, Pattern mode,
Utility mode, Voice mode, Effect mode, and Disk mode.

•

To switch modes, use the following 6 keys.

s

Move to Song mode.

p

Move to Pattern mode.

u

Move to Utility mode.

v

Move to Voice mode.

e

Move to Effect mode.

d

Move to Disk mode.

VOICE

EFFECT

DISK

SONG

PATTERN

UTILITY

F1

F2

F3

F4

F5

F6

Summary of Contents for QY700















































































































































































































































































































































Reviews:

No comments