Yamaha QY700, Owner'S Manual, Page: 50 / 334

49
BASIC CONCEPTS
Chapter 1
1
Variation mode = System
• When Variation mode is set to System, the three effects will
be connected as shown in the diagram below.
• The signals from all tone generator parts will be sent to the
reverb effect, chorus effect, and variation effect according
to the Voice mode settings Reverb Send Level
1
, Chorus
Send Level
2
, and Variation Send Level
3
. Here you can
adjust the effect depth for each part.
• The overall depth of each effect can be adjusted by the Ef-
fect mode settings Reverb Return Level
4
, Chorus Return
Level
5
, and Variation Return Level
6
. Here you can set
the amount of the signal that is returned from each effect, to
adjust the overall depth of the effect.
• The stereo location of the effect output is determined by the
Effect mode settings Reverb Pan
7
, Chorus Pan
8
, and
Variation Pan
9
.
• If Variation Mode = System, three bus lines will be con-
nected.
Send Chorus To Reverb
0
is a bus line that connects the
Chorus Effect to the Reverb Effect.
Send Variation To Chorus
A
is a bus line that connects the
Variation Effect to the Chorus Effect.
Send Variation To Reverb
B
is a bus line that connects the
Variation Effect to the Reverb Effect.
By using these three bus lines, you can use the effects in a
variety of ways, such as connecting the three effects in se-
ries, or dividing them.
Effect blocks diagram in Song mode (Variation mode= INS)
1
16
2
Reverb effect
Chorus effect
1
8
4 6
5 7
3
2
17
32
Variation effect
Effect blocks diagram in Song mode (Variation mode = SYS)
1
16
2
0
5
A
B
6
7
9
17
32
Chorus effect
Reverb effect
Variation effect
1
2
3
4
8
1
3
2
Voice mode (mixer)
Effect mode (Effect Connection)
4
5
6
7
8