manualshive.com logo in svg

Yamaha QY700, Owner'S Manual, Page: 290 / 334

Share
Download
Yamaha QY700 Owner'S Manual Download Page 290

289

Chapter 6. UTILITY MODE

6

1. System

2. Backlite saver

•

This function automatically turns off the display backlight
when the power has been left on for a certain time without
any operations being performed.

•

Like any fluorescent light, the backlight of the QY700 has
a finite lifespan. Turning the unit off when it will not be
used for an extended time will extend its life as long as
possible. However there may be times when the unit will be
left on and unused for an extended time. In such cases, you
can set Backlite Saver so that the backlight will automati-
cally turn off when the specified time elapses, to conserve
the lifespan of the backlight.

0101
1101

Off, 1 Hours, 2 Hours, 3 Hours, 4 Hours, 5 Hours, 6 Hours,
7 Hours, 8 Hours

1. System

•

Here you can make settings for system-related parameters,
such as Master Tune and controller settings.

1. Press 

u

.

▼

The indicator located above 

u

 will light, and you

will enter Utility mode.

2. Press 

1

 (System) to access the system page.

3. Move the cursor to the parameter that you wish to set.

4. Use 

n

/

y

, the data dial, or numeric keypad 

→

  

e

to set the value.

1. Master tune

•

This sets the overall tuning of the entire QY700 in 0.1 cent
steps.

•

The pitch of drum voices cannot be adjusted here. (

→

 p.182)

•

One cent is 1/100th of a semitone.

0101
1101

-102.4 – +000.0 – +102.3

F1

F2

F3

F4

F5

F6

1Ê

System

2Ê

MIDI

3Ê

MIDI filter

4Ê

Sequencer

5Ê

Click

6Ê

Fingered chord zone

u

Summary of Contents for QY700















































































































































































































































































































































Reviews:

No comments