Yamaha QY700, Owner'S Manual, Page: 265 / 334

264 Chapter 5. PATTERN MODE
2. Segment and notes (M and Note=)
• The two boxes to the right of the M select the phrase seg-
ment to be transposed. The first box sets the measure and
beat for the start point; the second box sets the end point.
The Note boxes select the range of notes (pitches) to be
targeted: notes with pitches outside this range are not af-
fected.
0101
1101
Measure: beat
001:1,...,256:8
Note range
C-2,...,G8
3. Transposition amount
• The Transpose value sets the number of transposition inter-
vals (semitones). A value of +12 would transpose all tar-
geted notes up by exactly one octave, while a value of -12
would transpose down by an octave.
0101
1101
-99,...,+00,...,+99
7. Pattern Jobs
Job 06 Shift Note
• This job replaces all occurrences of a specified pitch (within
the selected segment of the selected user phrase) with some
other selected pitch.
1. Phrase
• The Phrase value selects the user phrase.
0101
1101
01,...,99
2. Segment and notes (M)
• The two boxes to the right of the M select the phrase seg-
ment over which notes are to be changed. The first box sets
the measure and beat for the start point; the second box sets
the end point.
0101
1101
Measure: beat
001:1,...,256:8
3. Source pitch
• The first box to the right of “Note =” indicates the note
(pitch) to be changed. Each occurrence of this note will be
converted to an equivalent note of the destination pitch.
0101
1101
C-2,...,G8
4. Destination pitch
• The second box to the right of “Note=” selects the new pitch
for the transposed notes.
0101
1101
C-2,...,G8