manualshive.com logo in svg

Yamaha QY700, Owner'S Manual, Page: 264 / 334

Share
Download
Yamaha QY700 Owner'S Manual Download Page 264

263

Chapter 5. PATTERN MODE

5

Job 04   Crescendo

1. Phrase

•

The Phrase value selects the user phrase to be adjusted.

0101
1101

01,...,99

2. Segment and notes

0101
1101

Measure: beat

001:1,...,256:8

Note range

C-2,...,G8

3. Range

0101
1101

-99,...,+00,...,+99

7. Pattern Jobs

•

You use this job to apply a crescendo or decrescendo to the
specified range of notes (pitches) in the specified user phrase.
The QY700 produces the effect by applying a slight veloc-
ity adjustment (offset) at the beginning of the segment, with
the offset increasing gradually up until the end of the seg-
ment.

•

For full information about this job’s parameters and opera-
tion, refer to the explanation for the SONG-mode version of
the job, on page 148.  But note that the PATTERN-mode job
applies to a user phrase rather than a sequencer track, and
that maximum segment length for a phrase is 256 measures.

1. Phrase

•

This Phrase value selects the user phrase.

0101
1101

01,...,99

Job 05   Transpose

•

You use this job to transpose a specified range of notes
(pitches) within a specified segment of a designated user
phrase. You set the transposition level in semitone increments.

Summary of Contents for QY700















































































































































































































































































































































Reviews:

No comments