manualshive.com logo in svg

Yamaha QY700, Owner'S Manual, Page: 248 / 334

Share
Download
Yamaha QY700 Owner'S Manual Download Page 248

247

Chapter 5. PATTERN MODE

5

5. Phrase Recording

5. Phrase Recording

•

Although the QY700 comes equipped with many preset
phrases, it also allows you to record your own user phrases.
You use the Phrase Recording submode to make these re-
cordings.

•

The QY700 offers two general recording methods: realtime
recording and step recording.

•

With realtime recording, the QY700 operates as a tape re-
corder, recording the performance data as it is played. This
allows you to catch all the nuances of an actual perform-
ance.

•

With step recording, you input the phrase one note at a time,
almost as if you were writing the notes down on a music
sheet. This allows you to create complex phrases without
having to play them in real time at the keyboard.

1. Go to the PATCH screen (

→

 p.200) and select the

phrase number for the user phrase that you want to
record. (The “phrase number” consists of the prefix
US followed by a sequential number).

2. Go to the Recording Standby screen, and set the nec-

essary recording parameters. (

→

 p.248)

3. Record the phrase, using either realtime recording (

→

p.252) or step recording. (

→

 p.253)

4. Edit or otherwise modify the results using Phrase Edit

(

→

 p.254) and pattern jobs. (

→

 p.256)

5. When you are satisfied with the results, save the re-

corded phrase to disk. (

→

 p.307)

 e

Recording Standby 

4Ê

Replace

5Ê

Overdub

6Ê

Step Recording

p

PATCH

Summary of Contents for QY700















































































































































































































































































































































Reviews:

No comments