manualshive.com logo in svg

Yamaha QY700, Owner'S Manual, Page: 23 / 334

Share
Download
Yamaha QY700 Owner'S Manual Download Page 23

22

SETUP

3. Using the Style and Demonstration disk

Here’s how to use the included “STYLE & DEMONSTRATION” disk.

Contents of the disk

•

The included  disk contains “STYLE,” “DEMO 1” and
“DEMO 2.”

•

“DEMO 1” and “DEMO 2” allow you to enjoy demo play-
back, and to playback songs while adjusting the Play Ef-
fects or Multi to experience the possibilities of the QY700.

•

“STYLE” allows you to restore the factory settings of the
QY700.

Listening to the demo playback

• Here’s how to load a demo song file from disk and enjoy

the demo playback.

•

When “DEMO 1” or “DEMO 2” is loaded from disk, all
internal memory will be rewritten by the demo play-
back data. If internal memory contains any important
data that you wish to keep, save the data before load-
ing the demo.

1. With the label facing upward, insert the disk into the

floppy disk slot.

▼

Insert the disk all the way until it clicks into place.

2. Press 

d

.

▼

You will enter Disk mode.

3. Press 

2

 (Load).

▼

You will enter Load sub-mode, and the top line of the dis-
play will indicate “DISK  -- LOAD --”.

4. Press 

d

 [D1] (All Data).

▼

The Load All Data page will appear, and the filenames will
be displayed.

5. Use the cursor keys / data dial to move the cursor to

“DEMO 1” or “DEMO 2” and press 

e

.

▼

A message of “Are You Sure? (Y/N)” will appear, asking
whether it is OK to erase the data in internal memory and
load the data from disk.

• If you do not wish to erase the data currently in memory,

press 

n

 to halt loading. Then save the data in memory to

a disk, and perform the loading procedure once again. (

→

p.307)

Summary of Contents for QY700















































































































































































































































































































































Reviews:

No comments