Yamaha QY700, Owner'S Manual, Page: 206 / 334

205 Chapter 5. PATTERN MODE
5
0101
1101
Tempo
25.0,...,300.0 (=
q
)
Meter
1/16,...,16/16; 1/8,...,16/8; 1/4,...,8/4
1. Press
d
[D2] as necessary to move the cursor to
the tempo or meter setting.
2. Set the value using the data dial,
n
/
y
, or the nu-
meric keypad.
8. Click beat, click mode, and count
• These parameters set up the sequencer’s click sound.
• The beat value sets the click interval.
• The mode setting determines when the click feature is used.
• The count value sets the number of preliminary measures
used as a lead-in for realtime recording.
0101
1101
Click mode:
Off
Disables the click feature.
Rec
Use click for realtime and punch recording only.
Ply
Use click for realtime recording, punch recording,
and playback.
All
Always use click.
Click beat
x
,
e
,
q
,
h
,
w
Count
Off, 1,...,8Ms
1. Press
d
[D4] as necessary to move the cursor to
the appropriate click parameter.
2. Set the value using the data dial or
n
/
y
. (For the
click beat, you can also set the value by pressing the
appropriate note key on the numeric keypad.)
9. Data display
• This area shows the name of the currently selected phrase,
or the value of the currently selected scale-time or beat-
shift setting.
10. Track number
11. Measure
• The lower half of the PATCH screen presents a matrix show-
ing the pattern’s phrase arrangement, with the track num-
bers running down the left side and the measure numbers
running across the top.
• The track numbers run from 1 to 16. The measure numbers
run from M001 (measure 1) to the final measure in the pat-
tern. The entire arrangement cannot fit on the screen, but
you can scroll in any direction as required.
• You can edit the pattern by entering any phrase, or a rest
value, at any location on the matrix.
0101
1101
Track
1,...,16
Measure
M001,..., pattern length
(where pattern length is set by the second value
in the [D1] entry area; see page 204.)
• Move to the appropriate matrix position using
u
/
d
, and/or the cursor keys.
1. PATCH