manualshive.com logo in svg

Yamaha QY700, Owner'S Manual, Page: 182 / 334

Share
Download
Yamaha QY700 Owner'S Manual Download Page 182

181

3

Chapter 3. VOICE MODE

3. Voice edit

12. Pitch bend control

•

For each part, this sets the width of the pitch change that
can be controlled by pitch bend.

•

With a setting of +12, the pitch will change one octave when
pitch bend is fully raised or lowered.

•

With negative settings, the direction of pitch change will be
inverted.

0101
1101

-24–+00–+24

13. Dry level

•

This parameter can be set only if the Effect mode Variation
Mode is set to System. If Variation Mode is set to Insertion,
this parameter will not be displayed.

•

For each part, this sets the amount that will be sent to the
dry line of the effect.

•

Increasing the Dry Level will decrease the effect.

•

Decreasing the Dry Level will cause the stereo position of
sounds which pass through that effect to gather in one loca-
tion.

0101
1101

000 – 127

Summary of Contents for QY700















































































































































































































































































































































Reviews:

No comments