Yamaha QY700, Owner'S Manual, Page: 176 / 334

175
3
Chapter 3. VOICE MODE
• Here you can make detune and note shift settings for each
part that will apply during song playback or recording.
• These settings can be made while the song is playing back,
and tracks can also be muted or soloed, just as in Song mode.
1. Press
v
.
▼
The indicator above
v
will light, and you will enter
Voice mode.
2. Press
2
(Tune) to access the Tune page.
3. Use
d
/
u
or
l
/
r
to select a
part. You can switch between the screens for parts 1–
16 and parts 17–32 by pressing
6
.
4. Move the cursor to the parameter that you wish to set.
5. Use
n
/
y
, the data dial, or the numeric keypad
→
e
to set the value.
• In Voice mode, keys such as
r
,
s
,
t
and
r
/
f
will function in the same way as in Song Play mode. You
can use these keys to listen to the playback while you modify
the settings in realtime.
•
s
+ data dial or
s
+
n
/
y
will increase or
decrease the setting of all parts by the same value.
•
s
+ numeric keypad
→
e
will set all parts to the
same value.
Operations for “1. Data display” – “7. Bank number” are the same
as in the Mixer page. For details on these parameters, refer to the
explanations for the Mixer page (
→
p.170).
8. Detune
• This detunes the tuning relative to the standard pitch (440
Hz).
• This lets you make fine changes in the pitch of each part.
• Setting the melody part slightly sharp will make the melody
stand out, and setting the bass part slightly flat will give it
additional weight.
0101
1101
-12.8–+00.0–+12.7
9. Note shift
• This adjusts the pitch of each part in semitone steps.
0101
1101
-24–+00–+24
10. Transpose
• This adjusts the pitch of all parts in semitone steps.
0101
1101
-24–+00–+24
2. Tune