Periodic maintenance and adjustment
85
3.
Remove the bulb holder cover.
PZ50RT / PZ50GT / PZ50MT
PZ50VT / PZ50MP
4.
Unhook the bulb holder, and then remove
the burnt-out bulb.
5.
Install a new bulb, and then hook the bulb
holder onto the headlight unit.
NOTICE:
Keep oil and your hands away from
the glass part of the bulb or its life and
illumination will be affected. If the
glass is oil stained, thoroughly clean it
with a cloth moistened with alcohol or
lacquer thinner.
[ECS00621]
6.
Install the bulb holder cover, and then
connect the headlight coupler.
7.
Install the top cover (PZ50RT / PZ50GT /
PZ50MT) or close the shroud (PZ50VT /
PZ50MP).
ESU12280
Adjusting the headlight beams
Turn the headlight beam adjusting screws in
or out to adjust the headlight beams. The
headlight beams move as follows depending
on the turning direction of the headlight beam
adjusting screws.
●
Direction (a): Down and to the left
●
Direction (b): Up and to the right
●
Direction (c): Down and to the right
●
Direction (d): Up and to the left
1. Headlight coupler
2. Bulb holder cover
1. Headlight coupler
2. Bulb holder cover
1. Bulb holder
1. Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
1
U8GKS6E0.book Page 85 Tuesday, April 17, 2012 8:48 AM
