Yamaha PW SYSTEM Page 82 Manual Download

Page: 82 / 102

Symptom

Check

Action

Traveling range has decreased.

Are you fully

charging the

Battery Pack?

Charge the Battery Pack

until full (F).

Are you using

the system

under low-

temperature

conditions?

Normal traveling range will

be restored when the

ambient temperature rises.

Additionally, storing the

Battery Pack indoors (in a

warm location) before use

will improve traveling range

under cold conditions.

Is the Battery

Pack worn out?

Replace the Battery Pack.

(Display A)

The speed is not displayed even while

riding, and the function display is flashing.

(Display B)

An error description is indicated in the

function display.

The speed sensor cannot

detect a correct signal.

Turn off the power to the

Display Unit and then turn

it on again.

Select the assist mode and

then ride for a short

distance.

Also, make sure the magnet

is mounted correctly.

Summary of Contents for PW SYSTEM







































































































Search results

Summary of Contents for PW SYSTEM

Reviews:

Related manuals for PW SYSTEM

Brands by name

Popular brands

Yamaha PW SYSTEM, Manual

Search results

Summary of Contents for PW SYSTEM

Reviews:

Related manuals for PW SYSTEM

Brands by name

Popular brands