Yamaha PW SYSTEM Page 61 Manual Download

Page: 61 / 102

TIP

Battery Pack mounting method (Rear Carrier Battery)

The Battery Pack is installed from behind the rear carrier.

• Put the battery end on top of the guide.

• Slide the Battery Pack in the direction of the arrow until

hearing a click.

TIP

Battery Pack mounting method (Down Tube Battery)

• Insert the Battery Pack in the direction of the arrow so

that the battery bottom is aligned to the top of the case.

• Insert the upper part of the Battery Pack in the direction

of the arrow so that the battery handle is aligned to the

top of the battery lock.

• Press the upper part of the Battery Pack toward the

frame until it clicks into place to secure it.

TIP

Battery Pack mounting method (Multi Location Battery)

How to install Multi Location Batteries varies between bi-

cycles. For more information, see the instruction manual

supplied with the bicycle.

Battery end

Guide

Top of the case

Battery bottom

Battery lock

Battery handle

Summary of Contents for PW SYSTEM







































































































Search results

Summary of Contents for PW SYSTEM

Reviews:

Related manuals for PW SYSTEM

Brands by name

Popular brands

Yamaha PW SYSTEM, Manual

Search results

Summary of Contents for PW SYSTEM

Reviews:

Related manuals for PW SYSTEM

Brands by name

Popular brands