Yamaha PW SYSTEM Page 22 Manual Download

Page: 22 / 102

Conditions that could decrease range (remaining assist distance)

The range (remaining assist distance) will decrease when riding in the following conditions:

• Frequent starts and stops

• Numerous steep inclines

• Poor road surface conditions

• When riding together with children

• Riding into a strong head wind

• Low air temperature

• Worn-out Battery Pack

• When using the headlight (applies only to models equipped with lights powered by the Battery

Pack)

• Frequent acceleration

• Heavier rider and luggage weight

• Higher assist mode

• Higher riding speed

Range (Remaining assist distance) will also decrease if the bicycle is not maintained properly.

Examples of inadequate maintenance that could decrease range (remaining assist distance):

• Low tire pressure

• Chain not turning smoothly

• Brake engaged constantly

Summary of Contents for PW SYSTEM







































































































Search results

Summary of Contents for PW SYSTEM

Reviews:

Related manuals for PW SYSTEM

Brands by name

Popular brands

Yamaha PW SYSTEM, Manual

Search results

Summary of Contents for PW SYSTEM

Reviews:

Related manuals for PW SYSTEM

Brands by name

Popular brands