PSR-SX900/SX700 Reference Manual
81
5
M
IDI Song
Recordi
ng/Editi
ng
Recording Chord/Section Change Events via Step Recording
The explanations here apply when “Chord” is selected in step 4 on
. With [Step Rec] turned on at the bottom
left of the display, you can input the Chord/Section Change events for Style playback one by one.
Control Names and Functions
Example of Step Recording—Chord/Section Events
These instructions show how to input the Chord/Section change events of the above notation via Step Recording.
Before starting, note the following points:
• Turn off the STYLE CONTROL [AUTO FILL IN] button on the panel.
• Select a conventional 4-beat Style.
(PSR-SX900) The Audio part of an Audio Style cannot be recorded.
q
Event List
Indicates events such as Chord and Section changes which have been input. For details, refer to
w
Song Position
(Measure: Beat:
Clock)
Indicates the current Song position. Events such as Chord and Section change you have input are
recorded at the position indicated here. You can change the current position (Measure: Beat:
Clock*) by using the Data dial.
* Clock: Smallest unit for the Song position and note length. A quarter note consists of 1920 clocks.
e
>
/
o
(Play/Pause)
Plays back or pauses the current Song.
r
(Stop)
Stops the current Song to return to the top of the Song.
t
Cursor
Lets you move the cursor position.
y
Step Rec
Turning this on shows the Step Recording display, and turning it off shows the Step Edit display.
u
Note Indications
Select one of the four note lengths for inputting the next event.
i
Delete
Deletes the selected data.
t
q
y
u
i
w
r
e
NOTE
C
F
G
F
G7
C
1
2
3
MAIN A
BREAK
MAIN B
* The numbers shown in the illustration correspond to
the following operation step numbers.