Yamaha PSR-SX700 Reference Manual Download Page 132 | Manualshive

Page: 132 / 139

background image

132

PSR-SX900/SX700 Reference Manual

Factory Reset—Restoring the Factory Programmed Settings

On page 1/2, checkmark the boxes of the desired parameters then touch [Factory Reset] to initialize the settings of the
parameters which are checkmarked.

Backup/Restore—Saving and Recalling All Data and Settings as a Single File

On page 2/2, you can back up all data saved in the User drive (except Expansion Voices/Styles) and all settings of the
instrument to a USB flash drive as a single file named “PSR-SX900.bup” or “PSR-SX700.bup.”
Before calling up the display, you need to make all desired settings on the instrument.

Touching [Backup] saves the backup file to the root directory of the USB flash drive.
Touching [Restore] calls up the backup file and all data and settings are replaced.
If you want to include audio files, enter a checkmark to the “Include Audio files” beforehand.

Factory Reset/Backup

System

Restores the System Setup parameters to the original factory settings. Refer to “Parameter Chart” in
the Data List for details about which parameters belong to the System Setup.

MIDI

Restores the MIDI settings including the MIDI templates saved in the internal User memory to the
original factory status.

User Effect

Restores the User Effect settings including the following data to the original factory settings.

• User Effect types (

• User Master EQ types (

)

• User Master Compressor types (

)

• (PSR-SX900) User Vocal Harmony/Synth Vocoder types (pages

• User microphone/guitar settings (

Registration

Turns off all the REGISTRATION MEMORY [1]–[8] lamps, indicating that no Registration Mem-
ory Bank is selected although all the Bank files are maintained. In this status, you can create Regis-
tration Memory setups from the current panel settings.

Favorite

Removes all Styles or Voices from the Favorite tab (

) on the File Selection display.

Live Control

Restores all settings in the Live Control display (

) to the original factory settings.

Before using a USB flash drive, be sure to read “Connecting USB Devices” in the Owner’s Manual.

• You can back up User data such as Voice, Song, Style, and Registration Memory by copying them individually to a USB flash drive on the File Selection display.
• If the total size of the target data for backup exceeds 3.9 GB (excluding Audio files), the backup function is not available. If this happens, back up the User data by copying

the items individually.

Completing the backup/restore operation may take a few minutes. Do not turn off the power during backup or restoring. If you turn off the power
during backup or restoring, data may be lost or damaged.

NOTE

NOTE

NOTICE

«
...
130
131
132
133
134
...
»

Summary of Contents for PSR-SX700












































































































































Reviews:

No comments

Related manuals for PSR-SX700

Brand: Parr Instrument Pages: 110

Brand: Bacharach Pages: 64

Goldmann AT 870

Brand: Haag-Streit Pages: 20

Brand: Unipulse Pages: 129

Brand: IDEAL Pages: 11

Brand: IDEAL Pages: 16

Brand: MadMan Pages: 37

Brand: MADDALENA Pages: 5

Brand: National Instruments Pages: 18

Brand: Keithley Pages: 44

Brand: Keithley Pages: 76

Brand: Keithley Pages: 12

Brand: Keithley Pages: 281

DUSTHUNTER C200

Brand: SICK Pages: 126

Brand: SAT-Kabel Pages: 12

Brand: Magnescale Pages: 2

Brand: Datakom Pages: 27

Brand: Quadelectra Audioworx Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands