94
PSR-S975/S775 Reference Manual
8
Micr
oph
one/Guit
ar Input
Setup Parameters
[2
]–
[5
]
VOCODER
CONTROL
The Vocal Harmony effect in the Vocoder and Vocoder-Mono modes is
controlled by the notes you play on the keyboard and/or Song data.
[2
]
SONG
CHANNEL
MUTE/PLAY
When set to “MUTE,” the channel selected below (to control Harmony)
is muted (turned off) during Song playback. This enables you to sing a
song with harmony, even without backing or accompaniment.
[3
]
SONG
CHANNEL
OFF/1–16
When set to OFF, Song playback does not affect the Vocal Harmony.
When set to one of the values 1–16, note data (played from a Song on
this instrument or external MIDI sequencer) contained on the corre-
sponding channel is used to control the harmony.
[4
]
/[5
]
KEYBOARD
OFF:
Keyboard performance does not affect the Vocal Harmony.
UPPER:
Notes played to the right of the Split Point control the har-
mony.
LOWER:
Notes played to the left of the Split Point control the har-
mony.
NOTE
The separate point of the Keyboard settings (OFF/UPPER/LOWER) is Split Point (LEFT).
NOTE
When the settings of both keyboard performance and Song data are applied, those settings are
merged to control the harmony.
[7
]
CHORD
In Chordal mode, the following parameters determine which data in a
Song is used for chord detection.
OFF:
Chords are not detected from the Song data.
XF:
Chords of XF format are used for the Vocal Harmony.
1–16:
Chords are detected from note data in the specified Song chan-
nel.
NOTE
The Vocal Harmony may not work properly regardless of the setting here depending on the Song
data, since the selected Song may contain no chord data or insufficient note data for chord
detection.
