Yamaha PSR-S975 Reference Manual Download

Page: 114 / 136

114

PSR-S975/S775 Reference Manual

Mixing Console

Saving Master Compressor Settings

The Master Compressor settings you have edited can be saved as a User Compressor type.

Press the [I] (SAVE) button to enter the USER MASTER COMPRESSOR display.

Select the destination to which the User Master Compressor is to be saved, by using
the [3



]–[5



] buttons.

If necessary, change the User Master Compressor name. Press the [6



] (RENAME) button to call up

the Character Entry window, enter the name then press the [8



] (OK) button.

Press the [8



] (OK) button to carry out the Save operation.

Press the [EXIT] button to return to the previous display.

The saved Master Compressor type is shown in the TYPE selection list.

Summary of Contents for PSR-S975









































































































































Search results

Summary of Contents for PSR-S975

Reviews:

Related manuals for PSR-S975

Brands by name

Popular brands

Yamaha PSR-S975, Reference Manual

Search results

Summary of Contents for PSR-S975

Reviews:

Related manuals for PSR-S975

Brands by name

Popular brands