65
PSR-S770/PSR-S970
■
■
VERSION■UPGRADE
Never turn the instrument off while installing.
It may break the boot Flash ROM device.
Particularly, turning off the power immediately after staring installation may cause damage to the boot.
If operation still fails even after re-installation, the DMM/DMH circuit board must be replaced.
Never pull off the USB flash drive from the instrument while installing.
1
Insert the USB flash drive to the instrument.
*
This figure shows the PSR-S970.
2
While holding down the [START/STOP] button, press the [ ] (Standby/On) switch to start up installation mode.
■
●
How■to■Install
Download the version upgrade program from the Yamaha official website.
■
●
List■of■the■updating■Flash■ROM
PSR-S770
Main Program
DMM
IC008
Wave Data
IC600, IC601
PSR-S970
Main Program
DMH
IC008
NAND Data
IC202, IC203
Wave Data
IC600, IC601
■
●
File■name
PSR-S770
PSR-S770SETUP.PRG
PSR-S970
PSR-S970SETUP.PRG
Summary of Contents for PSR-S770
