74
PSR-S910/S710 Owner’s Manual
Registr
ation Memor
y – Sa
ving and Recalling Custom P
anel Setups –
6
You can call up the information display to take a look which Voices and Style are
memorized to the [1] – [8] buttons of a Registration Memory Bank.
1
Simultaneously press the REGIST BANK [+] and [-] buttons to
call up the Registration Bank Selection display, then use the
[A] – [J] buttons to select the desired Bank.
2
Press the [7
▲
] (INFO.) button to call up the information display.
By using the TAB [
E
][
F
] buttons, you can switch between the two information
display pages: information for the Registration Memory [1] – [4] buttons and
information for the [5] – [8] buttons.
3
Press the [F] (CLOSE) button to close the information display.
Confirming the Registration Memory Information
NOTE
You can instantly call up the informa-
tion display of the currently selected
Registration Memory Bank by press-
ing the [DIRECT ACCESS] button and
one of the REGISTRATION MEMORY
[1] – [8] buttons in sequence.
3
2
NOTE
If some Voice part is set to off (PSR-
S910), the Voice name for corre-
sponding part is shown in gray.
(On the PSR-S710, the Voice part
name for corresponding part is shown
in gray.)
Advanced Features
Refer to the Reference Manual on the website,
Chapter 6
.
Disabling recall of specific
items:
[FUNCTION]
→
[E] REGIST SEQUENCE/FREEZE/
VOICE SET
→
TAB [
E
][
F
] FREEZE
Calling up Registration
Memory numbers in order:
[FUNCTION]
→
[E] REGIST SEQUENCE/FREEZE/
VOICE SET
→
TAB [
E
][
F
] REGISTRATION SEQUENCE
