PSR-S670 Reference Manual
9
1
V
oices
The eight combinations of functions assigned to the LIVE CONTROL knobs are provided by default,
however, you can change the functions as desired from a variety of options.
1
Press the [ASSIGN] button to call up the LIVE CONTROL display.
2
Use the Cursor buttons [
][
] to select the number (row) of the functions you want to
chan
g
e.
3
Press one of the [7
]/[8
] (ASSIGN) buttons to call up the PARAMETER
ASSIGN window.
4
Use the [1
]–[4
] buttons (for knob 1) and the [5
]–[8
] buttons (for
knob 2) to select the functions to be assi
g
ned.
For information on available functions, see
.
5
Press the [EXIT] button to close the PARAMETER ASSIGN window.
6
If necessary, repeat steps 2–5 to chan
g
e the functions for other numbers.
NOTE
The settings here are maintained even when you turn off the power.
NOTE
Depending on the panel settings or how you move the knob, you may not notice any change to the parameter value, or the knob may not work properly,
even if you rotate it.
Editing Parameters Assigned to the LIVE CONTROL Knobs
3
2
4
