PSR-S670 Reference Manual
87
9
Connect
ions
Bass Note Settin
g
s for Style Playback via MIDI Receive
The explanations here apply to the BASS page in step 4 on
. These settings let you determine the bass
note for Style playback, based on the note messages received via MIDI. The note on/off messages received at
the channel(s) set to “ON” are recognized as the bass note of the chord of Style playback. The bass note will
be detected regardless of the [ACMP] or split point settings. When several channels are simultaneously set to
“ON,” the bass note is detected from merged MIDI data received over the channels.
1
Use the Cursor buttons [
][
] to to select the channel.
2
Use the [1
]–[8
] button to set the desired channel to ON or OFF.
You can also set all channels to OFF by pressing the [-/NO] and the [+/YES] buttons simultaneously.
Chord Type Settin
g
s for Style Playback via MIDI Receive
The explanations here apply to the CHORD DETECT page in step 4 on
. This page lets you select the
MIDI channels over which the MIDI data from the external device will be used to detect the Chord Type for
Style playback. The note on/off messages received at the channel(s) set to “ON” are recognized as the notes
for detecting chords in Style playback. The chords to be detected depend on the fingering type. The chord
types will be detected regardless of the [ACMP] or split point settings. When several channels are
simultaneously set to “ON,” the chord type is detected from merged MIDI data received over the channels.
The operation procedure is basically the same as that of the BASS display above.
The dots corresponding to each channel (1–16)
flash
b
riefly
w
hene
v
er any data is recei
v
ed on the
channel(s).
NOTE
If “WLAN” is shown, this instrument can handle
MIDI messages received via the USB wireless LAN
adaptor connected to the [USB TO DEVICE] termi-
nal. When “WLAN” is not shown although the USB
wireless LAN adaptor is connected, turn the instru-
ment off then on again.
2
1
