6
PSR-S670 Reference Manual
1
Vo
ic
e
s
When any one of the Arpeggio types is selected, only the parameters indicated by “*” in the list below can
be set. None of the parameters in the list below are available when the Harmony category “Multi Assign”
type is selected.
NOTE
The settings for the Arpeggio Quantize function and the Arpeggio Hold function can be made on the display called up via [FUNCTION]
TAB [
E
]
MENU 1
Cursor buttons [
][
][
E
][
F
] UTILITY
[ENTER]
TAB [
E
][
F
] CONFIG 2 (
).
Fine-tunin
g
the Pitch of the Entire Instrument
You can fine-tune the pitch of the entire instrument such as keyboard, Style and Song parts (except the
keyboard part played by the Drum Kit or SFX Kit Voices, and audio playback)—a useful feature when
playing the PSR-S670 along with other instruments or CD music.
1
Call up the operation display.
[FUNCTION]
TAB [
E
] MENU 1
Cursor buttons [
][
][
E
][
F
] MASTER TUNE/SCALE TUNE
[ENTER]
TAB [
E
] MASTER TUNE
2
Use the [4
]/[5
] buttons to set the tunin
g
in 0.2 Hz steps.
Press both [
] and [
] buttons (of 4 or 5) simultaneously to reset the value to the factory setting of 440.0
Hz.
[3
]
VOLUME*
Determines the volume level of the Harmony/Arpeggio notes generated
by the Harmony/Arpeggio function.
NOTE
When you are using certain Voices, such as Organ Voices, in which the TOUCH SENSE DEPTH is
set to 0 in the VOICE SET display (
), the volume does not change.
[4
]/
[5
]
ASSIGN*
Determines the keyboard part to which the effect is assigned.
AUTO:
Applies the effect to the part (RIGHT 1/2) for which PART ON/
OFF is on. If the Harmony/Echo category is selected, the RIGHT 1
part is given priority over the RIGHT 2 part when both parts are on.
MULTI:
This parameter is available when the Harmony/Echo category is
selected. When both parts are on, the note played on the keyboard is
sounded by the RIGHT 1 part and the harmonies (effect) are divided to
the RIGHT 1 and RIGHT 2 parts. When only one part is on, the note
played on the keyboard and effect are sounded by that part.
RIGHT1, RIGHT2:
Applies the effect to the selected part (RIGHT 1 or
RIGHT 2).
[6
]
SPEED
This parameter is only available when the “Echo” category (Echo, Trem-
olo, or Trill) is selected. It determines the speed of the Echo, Tremolo, and
Trill effects.
[7
]
CHORD NOTE
ONLY
This parameter is only available when the “Harmony” category is
selected. When this is set to “ON,” the Harmony effect is applied only to
the note (played in the right-hand section of the keyboard) that belongs to
a chord played in the chord section of the keyboard.
[8
]
TOUCH LIMIT
It determines the lowest velocity value at which the harmony, echo, trem-
olo, or trill will sound. This allows you to selectively apply the harmony
by your playing strength, letting you create harmony accents in the mel-
ody. The harmony, echo, tremolo, or trill effect is applied when you play
the key strongly (above the set value).
Pitch-Related Settings
