Yamaha PSR-S670, Reference Manual

Page: 58 / 98

58
PSR-S670 Reference Manual
5
Multi P
a
ds
11
Turn the Repeat parameter of each pad On or Off by usin g the [1

]–[4

] buttons.
If the Repeat parameter is on for the selected pad, playback of the corresponding pad will continue until
the MULTI PAD [STOP] button is pressed. When you press a Multi Pad for which Repeat is turned on
during Song or Style playback, playback will start and repeat in sync with the beat.
If the Repeat parameter is off for the selected pad, playback will end automatically as soon as the end of
the phrase is reached.
12
Turn Chord Match of each pad On or Off by usin g the [5

]–[8

] buttons.
If the Chord Match parameter is on for the selected pad, the corresponding pad is played back according to
the chord specified in the chord section of the keyboard generated by turning [ACMP] on, or specified in
the LEFT part of the keyboard generated by turning [LEFT] on (when turning the [ACMP] off).
13
Press the [EXIT] button to close the Repeat/Chord Match settin g window.
14
Press the [7

] (NAME) button to name the recorded Multi Pad.
15
If you want to record other Multi Pads, repeat steps 4–14.
16
Press the [8

] button to save the Multi Pad, then save the Multi Pad data as a Bank
containin g a set of four Pads.
For details, refer to “Basic Operations” in the Owner’s Manual.
NOTICE
The recorded data will be lost if you turn off the power to the instrument without carrying out the Save operation.
You can manage (rename, copy, paste and delete) your created Multi Pad Bank and each of the Multi Pads
belonging to the Bank. For instructions on managing the Multi Pad Bank file, refer to “Basic Operations” in
the Owner’s Manual. This section covers how to manage each Multi Pad.
1
Select the Multi Pad Bank containin g the Multi Pad to be edited.
1-1
Press the MULTI PAD CONTROL [SELECT] button to call up the Multi Pad Bank Selection
display.
1-2
Use the TAB [
E
][
F
] buttons to select the tab “PRESET,” “USER” or “USB” (when a USB
flash drive is connected), to which the desired Multi Pad is saved.
1-3
Select a Multi Pad Bank by usin g the Cursor buttons [

][

][
E
][
F
], then press the [ENTER]
button.
Editing Multi Pads
11 12