PSR-S670 Reference Manual
35
2
St
yles
1
In the CHANNEL pa
g
e, use the Cursor buttons [
][
] to select the edit menu.
1 QUANTIZE
Same as in the Song Creator (
), with the exception of the two additional available parameters below.
2 VELOCITY CHANGE
Boosts or cuts the velocity of all notes in the specified channel, according to the percentage specified here.
3 BAR COPY
This function allows data to be copied from one measure or group of measures to another location within
the specified channel.
4 BAR CLEAR
This function clears all data from the specified range of measures within the selected channel.
5 REMOVE EVENT
This function lets you remove specific events from the selected channel.
2
Use the [2
] (CHANNEL) buttons to select the channel to be edited.
The selected channel is shown at the upper left of the display.
3
Use the [3
]–[7
] buttons to edit the data.
4
Press the [ENTER] button to actually enter the edits for each display.
After the operation is completed, “UNDO -> [ENTER]” is displayed. You can restore the original data if
you are not satisfied with the results of the edit by pressing the [ENTER] button. The Undo function only
has one level; only the previous operation can be undone.
5
Save the edited Style (step 8 on
NOTICE
The edited Style will be lost if you change to another Style or turn off the power to the instrument without carrying out the Save operation.
[4
]
TOP
Specifies the first (TOP) and last (LAST) measures in the region to be
copied.
[5
]
LAST
[6
]
DEST
Specifies the first measure of the destination location, to which the data is
to be copied.
Sixteenth notes
w
ith s
w
ing
Eighth notes
w
ith s
w
ing
