PSR-S670 Reference Manual
31
2
St
yles
Style Assembly (ASSEMBLY)
This allows you to copy channel data as a Source Pattern from another preset Style to the currently created
Style. Use this function if you find a favorite rhythm pattern, bass line, chord backing or phrase from another
Style.
The instructions below apply to step 5 of the Basic Procedure on
. After selecting a Section and make
other settings on the BASIC page, carry out the instructions below.
1
Call up the operation display.
[FUNCTION]
TAB [
F
] MENU 2
Cursor buttons [
][
][
E
][
F
] STYLE CREATOR
[ENTER]
TAB [
E
][
F
] ASSEMBLY
2
If necessary, select the Section to be edited.
Even if the Section to be edited has already been selected on the BASIC page, you can change the Section
also on this page. Press the desired Section button on the panel to call up the SECTION window, then
press the [8
] (OK) button to actually enter the selection. If you want to select a fill-in section (which has
no panel button), press any one of the Section buttons and use the [6
]/[7
] buttons to select a fill-
in, then press the [8
] (OK) button.
NOTE
Intro 4 and Ending 4 can be selected on the display then created as your original Style although they are not available on the panel.
3
Replace the Source Pattern of the specific channel with that of another Style.
3-1
Select the desired channel to be replaced via the Cursor buttons [
][
].
3-2
Press the [ENTER] button to call up the Style Selection display.
3-3
Select the desired Style, then press the [EXIT] button to return to the ori
g
inal display.
3-4
Select the Section and Channel of the selected Style via the [2
]–[5
] buttons.
3-5
Confirm the sound with the newly assi
g
ned Source Pattern by pressin
g
the STYLE CON-
TROL [START/STOP] button to playback the Style.
3-3
3-2
3-4
3-5
3-1
