Yamaha PSR-S670, Reference Manual

Page: 15 / 98

PSR-S670 Reference Manual
15
1
V
oices
2 VIBRATO
Vibrato is a quavering, vibrating sound effect that is produced by
regularly modulating the pitch of the Voice.

EFFECT Page
1 REVERB DEPTH/CHORUS DEPTH/DSP DEPTH/PANEL SUSTAIN
2 DSP

HARMONY/ARP Page
Same as the display called up via [FUNCTION]

TAB [
E
] MENU 1

Cursor buttons [

][

][
E
][
F
]
HARMONY/ARPEGGIO

[ENTER], with the exception of the following points:
• The parameters set via the [7

] (DETAIL) buttons are shown on the top of the display.
• The [8

] (COMPARE) and [8

] (SAVE) buttons are available (see steps 4–5 on page 12 ).
[3

] DEPTH Determines the intensity of the Vibrato effect. Higher settings result in a
more pronounced Vibrato.
[4

] SPEED Determines the speed of the Vibrato effect.
[5

] DELAY Determines the amount of time that elapses between the playing of a key
and the start of the Vibrato effect. Higher settings increase the delay of the
Vibrato onset.
[1

]/
[2

]
REVERB
DEPTH Adjusts the reverb depth.
[3

]/
[4

]
CHORUS
DEPTH Adjusts the chorus depth.
[5

] DSP ON/OFF Determines whether the DSP effect is on or off.
This setting can also be made from the VOICE EFFECT [DSP] button on
the panel.
[6

] DSP DEPTH Adjusts the DSP depth.
If you want to re-select the DSP type, you can do so in the “2 DSP” menu
explained below.
[7

] PANEL
SUSTAIN Determines the sustain level applied to the edited Voice when the sustain
effect is on. The sustain effect is turned on/off from the display below.
[FUNCTION]

TAB [
E
] MENU 1

Cursor buttons [

][

][
E
][
F
]
VOICE SETTING

[ENTER]

TAB [
E
] VOICE CONTROL
[1

]/
[2

]
CATEGORY Selects the DSP effect category and type. Select a type after selecting a
category.
[3

]/
[4

]
TYPE
[6

] VARI. ON/OFF Turns the DSP Variation on or off for the selected Voice. This setting
can also be made from the VOICE EFFECT [DSP VARI.] button on the
panel.
[5

]/
[7

]
DETAIL Calls up a detailed setting display. Press the [5

] button for editing
the standard parameter value, and the [7

] button for editing the
Variation parameter value.
[2

]
–[4

]
PARAMETER Selects the DSP variation parameter to be set.
[5

]
/[6

]
VALUE Adjusts the value of the DSP variation parameter.
Pitch
DELAY
SPEED
DEPTH
Time