Yamaha PSR-EW400, Owner'S Manual

Page: 69 / 80

USB Flash Drive Operations
PSR-E453/PSR-EW400 Owner’s Manual
69
Re
fe
re
n
c
e
Exiting from a File Control
Display
To exit from the File Control display, press the
[FUNCTION], [VOICE], [STYLE], [SONG] or [PAT-
TERN] button.
You can also exit from the File Control function mode
as follows:
1
Use the CATEGORY [+] and [-] buttons to
call up “Exit?.”
2
Press the [0/EXECUTE] button to exit
from the File Control display.
Message List
Exit?
Message Comment
Can’tUse
• Indicates that the file control function is
currently unavailable since the USB flash
drive is being accessed.
• Displayed when attempting to save a User
Song recorded Pattern as SMF format 0.
Complet.
Indicates the specified job completion such
as data saving and transmission.
Data Err
Displayed when the user song contains ille-
gal data.
Disk Ful
Displayed when saving data cannot be exe-
cuted since the memory becomes full.
Delete any unnecessary data or use another
USB flash drive.
Error
Displayed when a file error or operational
error occurs.
File Ful
Displayed when saving data cannot be exe-
cuted since the total number of files exceeds
the capacity.
Delete the unnecessary data or use another
USB flash drive.
no data There is no data in the memory.
no file There is no file in the memory.
Ovr
(Flashes)
Communication with the USB flash drive has
been shut down because of overcurrent to
the USB flash drive. Disconnect the USB
flash drive from the [USB TO DEVICE] ter-
minal, then turn on the power of the instru-
ment.
Protect
Displayed when trying to save or delete data
on a protected USB flash drive, or formatting
a protected USB flash drive. Set protect to
off and try again.
UnFormat
Displayed when connecting an unformatted
USB flash drive.
UseAdpt
USB flash drive save, delete, and format
operations cannot be performed when the
instrument is being powered from battery.
Use an AC adaptor.