Yamaha PSR-EW400, Owner'S Manual

Page: 23 / 80

Try Playing a Variety of Instrument Voices
PSR-E453/PSR-EW400 Owner’s Manual
23
Qui
ck G
u
ide
You can add effects such as Harmony, Tremolo and
Echo to the Main Voice. For a list of the effects, refer
to the Harmony Type List in the separate Data List.
1
Press the [HARMONY] button to turn
Harmony on.
Although turning on the Harmony will select a
Harmony type suitable for the current Main Voice,
you can select a different Harmony type as
described in the following steps.
2
Hold down the [HARMONY] button for
longer than a second until “HarmType”
(Function 042) appears on the display.
After a few seconds, the current Harmony type
appears.
3
Rotate the dial to select the desired Har-
mony type.
The operation differs depending on the Harmony
type. Try playing the keyboard by referring to
“How to sound each Harmony Type” at right, and
the Harmony Type List.
4
Press the [HARMONY] button again to
turn Harmony off.
Adjusting the Harmony Volume
You can adjust the Harmony volume in the Function
Settings (page 60, Function 043).
Adding Harmony
Appears when the
Harmony is on.
HarmType
042
Trio
02
042
Current Harmony type
Hold for longer
than a second.
Playing each Harmony Type
• Harmony type 01 to 05
Press the right-hand keys while playing
chords in the Auto Accompaniment area
of the keyboard when ACMP is on (page
26).
• Harmony type 06 to 12 (Trill)
Hold down two keys.
• Harmony type 13 to 19 (Tremolo)
Keep holding
down the keys.
• Harmony type 20 to 26 (Echo)
Play the keys.