PSR-E443 Owner’s Manual
29
Qu
i
c
k Gui
d
e
Playing an External Audio Device with the Built-in Speakers
You can output the sound of an external audio device, such as a portable music player,
with the built-in speakers of this instrument by connectin
g
it via a cable. This lets you
play the keyboard alon
g
with playback of your music player.
1
Turn off the power for both the external
audio device and this instrument.
2
Connect the audio device to the instru-
ment’s [AUX IN] jack.
Use the cable which has the stereo-mini plug at
one side for connecting to this instrument and the
plug matching the output jack of the external
audio device at the other side.
3
Turn on the external audio device, then
this instrument.
4
Play back the connected external audio
device.
The sound of the audio device is output through
the speakers of this instrument.
5
Adjust the volume balance between the
audio device and this instrument.
Do this by adjusting both the volume of the audio
device and this instrument itself.
6
Play the keyboard alon
g
with the sound
of the audio device.
7
After finishin
g
the performance, stop
playback of the audio device.
When the sound of an external audio device is output
through this instrument, you can cancel or lower the
volume of the melody part of stereo playback. You
can use the function to cancel the melody part then
practice it via the keyboard.
1
Play back the connected external audio
device.
2
Press the [MELODY SUPPRESSOR] but-
ton to turn it on.
3
Press the [ASSIGN] button to call up
b
.
Then, adjust the pan position of the
sound to be cancelled with Knob A
(pa
4
Press the [MELODY SUPPRESSOR] but-
ton a
g
ain to turn it off.
• When you want to adjust the volume balance between
the audio device and this instrument further, after the vol-
ume of each has been adjusted, press the [ASSIGN]
button to call up
b
, then rotate the Knob B (page 41).
The knob B can adjust only the volume of the audio
device and Song/Style/Pattern playback sound.
• When you want to adjust the volume balance more, even
after having adjusted it with Knob B, adjust the volume
of the audio device using the function of this instrument.
Press the [FUNCTION] button, and hold down the CATE-
GORY [+] or [-] button until “AuxInVol” appears. Then,
set the value of the volume with the dial. In case of
adjusting the volume to more than 100, the audio device
sound can become distorted.
Stereo-mini
plug
Audio device (Portable
audio player, etc.)
NOTE
• Before connecting, turn off the power of both this
instrument and the external audio device. Also,
before turning the power on or off, make sure to set
all volume levels to minimum (0). Otherwise, damage
to the devices, electrical shock, or even permanent
hearing loss may occur.
• After connecting, first turn on the power to the exter-
nal audio device then to this instrument. Reverse this
order when you turn the power off.
Using the Melody Suppressor
• Depending on the particular music source, the melody
or vocal sound may not be cancelled as expected even
if the Melody Suppressor is turned on.
CAUTION
NOTICE
Indication is shown when this
function is turned on.
NOTE
Summary of Contents for PSR-E443
Page 1: ...DIGITAL KEYBOARD Setting Up Reference Appendix Quick Guide Owner s Manual EN ...
Page 68: ...MEMO ...
Page 70: ......