Styles (Auto Accompaniment) and Patterns
PSR-E433 Owner’s Manual
43
Re
fe
re
n
c
e
Setting the Split Point
The point on the keyboard that separates the left-hand
range and the right-hand range of the keyboard is
called the “Split Point.”
When a Style is selected and ACMP is on, the notes
played to the left of the Split Point are used to specify
the chord for Style playback. When a Pattern is
selected, the note played to the left of the Split Point is
used to specify the key for Pattern playback. When the
Split function is on, the notes played to the left of the
Split Point are used to play the Split Voice.
The initial default Split Point is key number 54 (the
F
#
2 key), but you can change it to another key.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [+] and [-] buttons to
call up “SplitPnt” (Function 007).
You can call up this display also by pressing the
[STYLE] then holding the [ACMP] button for lon-
ger than a second.
3
Rotate the dial to set the Split Point
between 036 (C1) and 096 (C6).
Playing Chords Without Style
Playback
If you press the [STYLE] button, press the [ACMP
ON/OFF] button to turn ACMP on (the ACMP ON
icon appears), and play the chord in the Left hand
range of the keyboard (with SYNC START off), the
chord sound will be heard without Style playback.
This is referred to as “Stop Accompaniment.” The
specified chord will be shown in the display, and
affects the Harmony function (page 19).
• The Split Point set here is applied common to the Style,
Pattern and Voice.
• During the Lesson playback, the Split Point cannot be
changed.
SplitPnt
054
007
Split Point
Split Point (54: F
#
2)
Split voice
Main voice
NOTE
PopBossa
109
Appears when auto accompaniment is on
Accompani-
ment range
Summary of Contents for PSR-E433
Page 1: ...EN Owner s Manual DIGITAL KEYBOARD Setting Up Reference Appendix Quick Guide ...
Page 65: ......
Page 67: ...MEMO ...
