Yamaha PSR-E373, Owner'S Manual

Page: 44 / 92

Recording Your Performance
PSR-E373, PSR-EW310, YPT-370 Owner’s Manual
44
Re
fe
re
n
c
e
1
Make the desired settin g s, such as those
of Voice or Style.
If you want to record the melody performance,
turn ACMP off (page 24). If you want to record
Style playback, turn ACMP on (page 24).
2
While holdin g down the [REC] button,
press the desired Track button 1 or 2 to
en
g a g e the Record mode.
If you want to record Style playback, make sure to
select the Track 2. If you want to record melody
performance, select either Track 1 or Track 2 as
desired. The illustration below is the example
when selecting Track 2.
The User Song appears on the display.
If Track 2 is selected as Recording target for
example and Track 1 contains already recorded
data, L flashes and R lights in the display. Turning
on or off R via the [TRACK 1] button will deter-
mine whether you listen to a previously recorded
Track or not while recording a new Track.
3
Press the [+/YES], [-/NO] buttons to
select the User Son
g you want to record.
4
Same as in Steps 3 to 5 (pa g e 43) in
“Quick Recordin g .”
When playing back the recorded song, pressing
[REC TRACK 1] or [REC TRACK 2] button allows
you to mute Track 1 or Track 2. Each time the but-
ton is pressed, playback/mute is switched.
1
Press the [SONG] button then select the
desired User Son
g by usin g the Number
buttons.
2
Press and hold the [REC] button for lon-
g er than a second.
A confirmation message appears.
To cancel the operation, press the [-/NO] button.
3
Press the [+/YES] button.
A confirmation message appears again.
To cancel the operation, press the [-/NO] button.
4
Press the [+/YES] button to clear the
Son
g .
A “Writing!” message appears while the track is
being cleared.
Recording to a Specified Track
001
User 1
EC
User Song
The L (TRACK 1) and R (TRACK 2) indicators light
when the respective track contains data.
They are unlit when the respective track contains no
data.
Even if a track contains data, it is unlit when the track is
muted.
In addition, they light when the respective track is
selected as a Recording target.
Clearing a User Song
The L (TRACK 1) and R (TRACK 2)
indicators light when the respective
track contains data.
They are unlit when the respective track
is muted, even if the track contains data.
ClrUser1 YES
Hold for longer
than a second.
Sure?
YES