124
PSR-A3000 Owner’s Manual
You can memorize your original panel settings to a One Touch Setting. The newly created One Touch Setting will
be saved in the USER drive or a USB flash drive as a Style, and you can call up the One Touch Setting as a part of
the Style.
1
Select the desired Style to memorize your One Touch Setting.
2
Make the desired panel settings, such as those for Voices and effects.
3
Press the [MEMORY] button in the REGISTRATION MEMORY section.
The REGISTRATION MEMORY CONTENTS display appears. However you do not need to make any
settings here, since the On/Off settings in this display do not affect the One Touch Setting function.
4
Press one of the ONE TOUCH SETTING [1]–[4] buttons to which you wish to memorize
your panel settings.
A message appears. If you are sure you want to memorize the current settings to the selected button, press the
[F] (YES) button. If you want to change the settings, press the [G] (NO) button, then repeat steps 2–4 as
necessary.
NOTE
For ONE TOUCH SETTING buttons to which your original panel settings have not been memorized, the OTS settings of the original Style will be maintained.
5
Press the [F] (YES) button to call up the Style Selection display and save the One Touch
Setting as a Style.
For instructions on the Save operation, refer to page 28.
NOTICE
The memorized panel settings (One Touch Settings) will be lost if you change the Style or turn the power off without carrying out the Save
operation.
Memorizing Original Settings to One Touch Setting
Summary of Contents for PSR-A3000
Page 100: ...100 PSR A3000 Owner s Manual Memo ...
Page 218: ...Memo ...
Page 220: ......
Page 223: ......