manualshive.com logo in svg

Yamaha PSR-A2000 Oriental, Owner'S Manual

The Yamaha PSR-A2000 Oriental is a versatile Oriental keyboard featuring a wide range of Arabic sounds and styles. Enhance your musical creativity with this instrument, and explore its full potential by downloading the free (Arabic) Owner's Manual from manualshive.com, offering step-by-step instructions and useful tips for optimal usage.

Share
Download
background image

Connections 

– Using 

Y

our Instr

ument with Other De

vices –

10

PSR-A2000 Owner’s Manual

93

By connecting a USB storage device to the instrument’s [USB TO DEVICE] terminal, you can save data you’ve 
created to the device.

Connecting a USB Storage Device

Precautions when using the [USB TO DEVICE] terminal

When connecting a USB device to the terminal, be sure to handle the USB device with care. Follow the important precautions below.

Compatible USB devices

• USB storage devices (flash memory, etc.)
• USB hub
The instrument does not necessarily support all commer-
cially available USB devices. Yamaha cannot guarantee 
operation of USB devices that you purchase. Before pur-
chasing a USB device for use with this instrument, please 
visit the following web page:

http://download.yamaha.com/

Connecting a USB device

•

When connecting a USB device to the [USB TO 

DEVICE] terminal, make sure that the connector on the 
device is appropriate and that it is connected in the 
proper direction.

• When connecting a USB cable, use a cable of less than 3 

meters.

• If you intend to connect two devices at the same time to a 

terminal, you should use a USB hub device. The USB 
hub must be self-powered (with its own power source) 
and the power must be on. Only one USB hub can be 
used. If an error message appears while using the USB 
hub, disconnect the hub from the instrument, then turn 
on the power of the instrument and re-connect the USB 
hub.

• Though the instrument supports the USB 1.1 standard, 

you can connect and use a USB 2.0 storage device with 
the instrument. However, note that the transfer speed is 
that of USB 1.1.

Using USB Storage Devices

By connecting the instrument to a USB storage device, you 
can save data you’ve created to the connected device, as well 
as read data from the connected device. 

The number of USB storage device to be used

Up to two USB storage devices can be connected to the [USB 
TO DEVICE] terminal. (If necessary, use a USB hub. The 
number of USB storage devices that can be used simulta-
neously with musical instruments even when a USB hub is 
used is a maximum of two.) This instrument can recognize up 
to four drives in one USB storage device.

Formatting USB storage media

When a USB storage device is connected or media is inserted, 
a message may appear prompting you to format the device/
media. If so, execute the Format operation (page 94).

NOTICE

The format operation overwrites any previously existing data. Make 
sure that the media you are formatting does not contain important 
data. Proceed with caution, especially when connecting multiple 
USB storage media.

To protect your data (write-protect)

To prevent important data from being inadvertently erased, 
apply the write-protect provided with each storage device or 
media. If you are saving data to the USB storage device, make 
sure to disable write-protect.

Connecting/removing USB storage device

Before removing the media from the device, make sure that 
the instrument is not accessing data (such as in the Save, 
Copy and Delete operations).

NOTICE

Avoid frequently turning the power on/off to the USB storage device, 
or connecting/disconnecting the device too often. Doing so may 
result in the operation of the instrument “freezing” or hanging up. 
While the instrument is accessing data (such as during Save, Copy, 
Delete, Load and Format operations) or is mounting the USB stor-
age device (shortly after the connection), do NOT unplug the USB 
connector, do NOT remove the media from the device, and do NOT 
turn the power off to either device. Doing so may corrupt the data on 
either or both devices.

NOTE

For more information about the handling of USB devices, refer to the owner’s manual of the USB device.

NOTE

Other USB devices such as a computer keyboard or mouse cannot be used.

Summary of Contents for PSR-A2000 Oriental















































































































































































































Reviews:

No comments

Related manuals for PSR-A2000 Oriental

Palm Wireless Keyboard Handbook preview
Wireless Keyboard
Brand: Palm Pages: 20
M-Audio Axiom AIR 25 Manual preview
Axiom AIR 25
Brand: M-Audio Pages: 3
M-Audio Session KeyStudio Quick Start Manual preview
Session KeyStudio
Brand: M-Audio Pages: 16
M-Audio Keystation 49e User Manual preview
Keystation 49e
Brand: M-Audio Pages: 20
L33T GAMING THOR-MEGINGJORD User Manual preview
THOR-MEGINGJORD
Brand: L33T GAMING Pages: 4
John Gold Gold Cruuse Cruisecontrol GC90 Installation Manual preview
Gold Cruuse Cruisecontrol GC90
Brand: John Gold Pages: 24
Zagg VYVPA-BK04 User Manual preview
VYVPA-BK04
Brand: Zagg Pages: 13
Withings Pulse HR Quick Installation Manual preview
Pulse HR
Brand: Withings Pages: 16
Webasto Telestart T91 Installation Instructions Manual preview
Telestart T91
Brand: Webasto Pages: 18
Casio LK100 - Lighted Keyboard With LCD Display User Manual preview
LK100 - Lighted Keyboard With LCD Display
Brand: Casio Pages: 40
Pyle PKBRD37WT User Manual preview
PKBRD37WT
Brand: Pyle Pages: 8
Real-El M47 RGB User Manual preview
M47 RGB
Brand: Real-El Pages: 5
SMK-Link VP6320 User Manual preview
VP6320
Brand: SMK-Link Pages: 11
Seiko WP7500 Operation Manual preview
WP7500
Brand: Seiko Pages: 36
ACCO Brands M01369-K User Manual preview
M01369-K
Brand: ACCO Brands Pages: 7
BFT ESPAS10 MONEYBOX Installation And User Manual preview
ESPAS10 MONEYBOX
Brand: BFT Pages: 26
Panasonic CF-VKBL03AM Operating Instructions preview
CF-VKBL03AM
Brand: Panasonic Pages: 4
Panasonic FZ-VKB55 Series Operating Instructions Manual preview
FZ-VKB55 Series
Brand: Panasonic Pages: 6

Brands by name

Popular brands

Load more brands