Or
iental Scales
– Setting Or
iginal Scales –
9
PSR-A2000 Owner’s Manual
89
2
While holding the SCALE MEMORY [MEMORY] button, press
one of the SCALE MEMORY [1]–[5] buttons (the desired one for
memorizing the scale settings).
The corresponding SCALE MEMORY button will light. Any data that was
previously in the selected location is erased and replaced by the new settings.
3
Memorize scale settings to other buttons by repeating steps 1
and 2 above.
The memorized settings can be recalled by simply pressing the desired number
button.
The scale settings memorized to the SCALE MEMORY [1]–[5] buttons can be
saved as a single Scale Tune Bank file.
1
Press the [DIRECT ACCESS] button, followed by the [EXIT]
button to call up the Main display.
NOTE
The [RESET] button lights up when all
notes are of normal pitch.
About the lamp status of the [1]–[5] buttons
•
On:
Data registered and currently selected
•
Off:
No data registered, or not currently selected
NOTICE
The scale settings memorized to
the numbered button will be lost
if you turn the power to the
instrument off without executing
the Save operation.
Instantly resetting the Scale Settings
Pressing the SCALE MEMORY [RESET] button can reset all notes to nor-
mal pitch (0 cent). This operation does not erase the settings memorized to
the [1]–[5] buttons.
Saving the Scale Memory as a Bank File
Bank 01
Bank 02
Bank 03
Bank 04
2
Summary of Contents for PSR-A2000 Oriental
Page 203: ...PSR A2000 Owner s Manual 203 ...
