170
PSR-A2000 Owner’s Manual
Mixing Console
– Editing the
V
olume and
T
onal Balance –
8
Selecting an Effect type
1
Press the [F] (TYPE) button in the EFFECT Page of the Mixing Console display.
The Effect Type Selection display is called up.
2
Use the [1
▲▼
]/[2
▲▼
] buttons to select the effect BLOCK.
NOTE
When the “Connection” parameter of the DSP1 (selected on step 3 of “Editing and Saving the effect” section on page 171) is set to “System,” the DSP1
effect will be applied overall to the Style and Song. When it is set to “Insertion,” the DSP1 effect will behave as same as other DSP blocks and be applied
to only the part(s) selected in step 3.
3
Use the [3
▲▼
]/[4
▲▼
] buttons to select the part to which you want to apply the
effect.
Please note that a part cannot be selected if the selected block is REVERB, CHORUS or DSP1.
4
Use the [5
▲▼
]/[6
▲▼
] buttons to select the effect CATEGORY.
5
Use the [7
▲▼
]/[8
▲▼
] buttons to select the effect TYPE.
If you want to edit the effect parameters, go on to the next operation.
Editing EFFECT Parameters
Effect
Block
Effect-applicable
parts
Effect characteristics
REVERB
All parts
Reproduces the warm ambience of playing in a concert hall or jazz
club.
CHORUS
All parts
Produces a rich, “fat” sound as if several parts are being played
simultaneously. In addition, other type effects (such as reverb, delay,
etc.) can also be selected in this effect block.
DSP1
STYLE PART,
SONG CHANNEL
1–16
This effect is applied only to Style/Song parts.
DSP2,
DSP3,
DSP4
RIGHT 1, RIGHT 2,
LEFT, SONG
CHANNEL 1–16
Any unused DSP blocks are automatically assigned to the appropri-
ate parts (channels) as needed. One DSP block is available only for
one of the keyboard parts or Song parts.
2
3
4
5
Summary of Contents for PSR-A2000 Oriental
Page 203: ...PSR A2000 Owner s Manual 203 ...
