Yamaha PORTATONE PSR-OR700, Owner'S Manual

Page: 133 / 196

Recalling the Registered Panel Setups
PSR-OR700 Owner’s Manual 133
Registering and Recalling Custom P
anel Setups
Deleting an Unneeded Panel Setup/Naming a
Panel Setup
The panel setups can be deleted or named individually as desired.
1
Press the REGIST BANK [+] and [–] buttons simultaneously to call up
the REGISTRATION BANK Selection Display.
2
Press one of the [A]–[J] buttons to select a bank to be edited.
3
Press the [8
† †
† †
] (EDIT) button to call up the REGISTRATION EDIT Dis-
play.
4
Edit the panel setups.
• Deleting a panel setup
Press the [5
†
] button to delete a panel setup (page 69).
• Renaming a panel setup
Press the [1
†
] button to rename a panel setup (page 70).
5
Press the [8
π π
π π
] (UP) button to return to the REGISTRATION BANK
Selection display.
Parameter Lock
You can “lock” specific parameters (e.g., effect, split point, etc.) to make
them selectable only via the panel control — in other words, instead of via
Registration Memory, One Touch Setting, Music Finder, Song or incoming
MIDI data, etc.
1
Call up the Parameter Lock display.
[FUNCTION]
→ → → →
[J] UTILITY
→ → → →
TAB [
√
][
®
]
→ → → →
CONFIG 1
→ → → →
[B] 3 PARAM-
ETER LOCK
2
Select the desired parameter by using the [1
π π
π π†
†
† †
]–[7
π π
π π†
†
† †
]buttons,
then lock it with the [8
π π
π π
] (OK) button.
The number above the
file name corresponds
to the REGISTRATION
MEMORY [1]–[8] but-
tons.