124
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
QQQQQQQQQQQQQQQQQQ
QQQQQQQQQQQQQQQQQQ
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
■
FINGERING
........................................................................................................................................................................................
Use the
FINGERING
LCD dials to select the SINGLE FINGER, MULTI FINGER, FINGERED 1, FINGERED
2, FULL KEYBOARD, or MANUAL BASS mode. See the descriptions on page 30 for details on the operation of
each mode.
F3: CONTROLLER
The F3 function group includes a range of functions that affect how the PSR-8000 responds to control via a foot
controller plugged into the rear-panel FOOT PEDAL VOLUME jack, footswitches plugged into the rear-panel
FOOT PEDAL SWITCH jacks, the MODULATION wheel, initial keyboard touch response, and aftertouch
response.
■
FOOT CONTROLLER
...........................................................
●
VOLUME
Determines whether an optional YAMAHA FC7 Foot Con-
troller plugged into the rear-panel FOOT PEDAL VOLUME
jack will control master volume, or only the volume of specified
parts and voices.
Use the
MASTER/INDIVIDUAL
LCD button to select
MASTER for master volume control or INDIVIDUAL for
individual part/voice volume control.
Individual part and voice assignment parameters for the
SONG, ACMP, M.PAD, LEFT, R1, R2, LEAD, and MIC (mi-
crophone) parts are available when the INDIVIDUAL type is
selected. Use the corresponding LCD dials to turn volume
control for the corresponding parts ON or OFF as required.
• Normally you’ll want to be able to apply expression control to the
manual voices without affecting the accompaniment and rhythm sound,
so the INDIVIDUAL type should be selected and the voices you want
to control turned on while the remaining parts are turned off.
●
SW1 (FOOTSWITCH 1) & SW2 (FOOTSWITCH 2)
Determine the functions of footswitches plugged into the
rear-panel FOOT PEDAL SWITCH 1 and FOOT PEDAL
SWITCH 2 jacks, and to which of the PSR-8000 voices the
footswitches will apply.
Use the
TYPE
LCD dials to select one of the footswitch
functions listed below. When the SUSTAIN, SOSTENUTO,
SOFT, GLIDE, PORTAMENT, or DSP VARIATION type is
selected, use the
LEFT
,
R1
,
R2
, and
LEAD
LCD dials (R1, R2,
and LEAD when DSP VARIATION is selected) to turn footswitch
control for the corresponding parts ON or OFF as required.
The PSR-8000 “Functions”