Recording Your Performances and Creating Songs — Song Creator
PSR-2000/1000
100
■
Play back the newly created chord progression
Use the
[C] (
)
button to move the cursor to the beginning of the song, and press the
SONG
[START/STOP]
button to hear the newly entered notes. To actually enter the
recorded data, press the
[EXIT]
button. The entered data can be edited from the
SONG
CREATOR (CHD)
display (page 106). Finally, press the
[F] (EXPAND)
button from the
SONG CREATOR (CHD)
display in order to convert the input data into song data.
3
Press the MAIN [B] button to specify the section and enter the chord indicated at right.
C
F
G
F
G7
C
MAIN A
BREAK
MAIN B
MAIN
C
003:1:000
Select this note value and play
the chords indicated at right.
To enter a fill-in, press the
[AUTO FILL IN]
button and
press one of the
MAIN
[A]–
[D]
buttons.
END Mark
An “END” mark is shown in
the display, indicating the
end of the song data.
The actual position of the
End mark differs depending
on the section that is input at
the end of the song. When
an Ending section is input,
the End mark automatically
follows the Ending data.
When a section other than
Ending is input, the End
mark is set two measures
after the final section.
The End mark can be freely
set to any position desired.
▲
