76
DGX-670 Reference Manual
9
Conn
ections
4
Use the [2
]–[8
] buttons to set the details of the selected functions (the part
for which the function is applied, etc.).
The available parameters differ depending on the function selected in step 3.
5
If necessary, make the following settings on the display called up via TAB [
F
]
Setting
Cursor button [
]
3
.
Assignable Pedal Functions
For functions indicated with “*”, use the separately sold pedal FC3A or the pedal unit LP-1B/LP-1WH;
proper operation cannot be done with a footswitch.
[3
] –
[4
]
Switch with
Main Voice
When this is set to
Off
, the function assignments of the Center and Left
pedals of the pedal unit connected to the [PEDAL UNIT] jack are main-
tained even if the Main Voice is changed (
).
[5
] –
[6
]
AUX Pedal
Polarity
Pedal on/off operation may differ depending on the particular pedal
you’ve connected to the [AUX PEDAL] jack. For example, pressing down
on one pedal may turn the selected function on, while pressing a different
make/brand of pedal may turn the function off. If necessary, use this set-
ting to reverse the operation.
Articulation 1, 2
When you use a Super Articulation Voice that has an effect assigned to the pedal, you
can enable the effect by pressing the pedal. You can turn this pedal function on or off
for each keyboard part on this display.
Unison On/Off
Allows you to use a pedal to turn the Unison function on/off.
Sustain
Allows you to use a pedal to control sustain. When you press and hold the pedal, all
notes played on the keyboard have a longer sustain. Releasing the pedal immediately
stops (damps) any sustained notes. You can turn this pedal function on or off for each
keyboard part on this display. The
Half Pedal Point
parameter allows you to specify
how far down you should press on the pedal until the damper effect starts working.
Sostenuto
Allows you to use a pedal to control the Sostenuto effect. If you play a note or chord
on the keyboard and press the pedal while holding the note(s), the notes will sustain
as long as the pedal is held. However, all subsequent notes will not sustain. This
makes it possible to sustain a chord, for example, while other notes are played stac-
cato. You can turn this pedal function on or off for each keyboard part on this display.
Soft
Allows you to use a pedal to control the Soft effect. Pressing this pedal reduces the
volume and changes the timbre of the notes you play. This is effective only for cer-
tain appropriate Voices. You can turn this pedal function on or off for each keyboard
part on this display. The
Half Pedal Point
parameter allows you to specify how far
down you should press on the pedal until the soft effect starts working.
Cursor [
]
