Yamaha Portable Grand DGX-670, Owner'S Manual

Page: 89 / 116

DGX-670 Owner’s Manual 89
M
ix
er
–
E
d
it
in
g
th
e V
olum
e
an
d
T
on
al
B
al
an
ce
–
8
3
Use the TAB [
L
][
R
] buttons to select the page for the parameters to be edited.
Unlike the other pages, select the following pages when you want to adjust the tonal
characteristics of the entire sound (except for audio received via the USB Audio Player function
and Audio Input Sounds) of this instrument.
For details, refer to the Reference Manual on the website.
4
Use the Cursor buttons [ U ][ D ][
L
][
R
] to select a parameter, and then use the
[1
UD
] – [8
UD
] buttons to set the value for each part.
5
Save your Mixer settings.

To save the Panel settings:
Register them to Registration Memory (page 81).

To save the External settings:
For the microphone settings, register them to Registration Memory (page 81).
For the Audio Input Sounds, the save operation is not necessary. These settings are retained
even when the power is turned off.

To save the Style settings:
Save them as a Style file to the User drive or USB flash drive. If you want to recall the settings for
future use, select the Style file saved here.
1.
Call up the operation display.
[MENU] → Cursor buttons [
U
][
D
][
L
][
R
] Style Creator , [ENTER]
2.
After the message asking whether you want to edit the existing Style or create a new
Style appears, press one of the [5
UD ]/[6 UD ] ( Current Style ) buttons.
3.
Press the [EXIT] button to close the Rec Channel window.
4.
Press one of the [8 UD ] ( Save ) buttons to call up the Style Selection display, and then
save the settings as a Style file (page 26).
Song1–8 ,
Song9–16
Select this when you want to adjust the balance among all the parts (channels) of the
Song.
Volume/Pan For adjusting volume and panning for each part and changing the Voice.
Filter For adjusting the Harmonic Content (resonance) and sound brightness for each part.
Effect For selecting an effect type and adjusting its depth for each part.
EQ For adjusting equalization parameters to correct the tone or timbre of the sound for
each part.
Master EQ For selecting the Master EQ (Equalizer) type applied to the entire sound. The related
parameters can be edited and saved as your original Master EQ type.
Compressor For turning the Master Compressor on/off and selecting its type. The related
parameters can be edited and saved as your original Master Compressor type.