background image

DGX-670 Owner’s Manual

62

Playback-related Operations

Pause

Press the [

R

/

K

] (Play/Pause) button during playback. Pressing it again resumes Song playback from the 

current position.

Synchro Start

You can start playback as soon as you play the keyboard. While playback is stopped, press the [

R

/

K

] (Play/

Pause) button and the [

LL

] (Rewind) button simultaneously. The [

R

/

K

] (Play/Pause) button flashes, 

indicating the standby status. To cancel the Synchro Start function, repeat the same operation.

Rewind/Fast Forward

Hold the [

LL

] (Rewind) or [

RR

] (Fast forward) button during playback or while the Song is paused to 

move backward/forward continuously. Pressing the [

LL

] (Rewind) button during playback or while the 

Song is paused jumps back to the top position of the Song.
Holding (or pressing) the [

LL

] (Rewind) or [

RR

] (Fast forward) button calls up a pop-up display 

showing the current measure number (or Phrase Mark number). While the Song Position pop-up is shown 
on the display, you can also use the Data dial to adjust the value.

NOTE

Phrase Mark is a pre-programmed marker in certain Song data, which indicates a specific location in the Song.

Adjusting the tempo

Same procedure as with Style tempo. See page 52.

Adjusting the volume balance among Song, Style and Keyboard

You can adjust the volume balance among the keyboard parts (Main, Layer, Left), the Style, the Song, the 
USB Audio Player, the Audio, the microphone sound, and the Audio Input Sound from the external device 
(page 95). These can be adjusted in the 

Volume/Pan

 tab on the 

Mixer

 display. See page 88.

Transpose the Song playback

See page 44.

For Songs not containing Phrase Marks

For Songs containing Phrase Marks

To change the units used in rewinding/fast-
forwarding the Song from 

Bar

 to 

Phrase Mark

press one of the [3

UD

]/[4

UD

] buttons. To 

rewind/fast forward it in 

Bar

 units again, press 

one of the [1

UD

]/[2

UD

] buttons.

Summary of Contents for Portable Grand DGX-670





















































































































Reviews: