61
Digital Control Section
4
Press the alpha-numeric [1] key to begin loading the
file, or [3] to abort the operation. Never remove a
memory card from the card slot during a load
operation. The following display will appear while
the data is being loaded.
●
Data Delete
2
After selecting DEL and pressing [ENTER] in step 1,
above, you will need to select the data file you want
to delete from the memory card.
3
When you have selected the file to be deleted press
the [ENTER] key. The following confirmation
message will appear.
4
Press the alpha-numeric [1] key to begin deleting the
file, or [3] to abort the operation. Never remove a
memory card from the card slot during a delete
operation. The following display will appear while
the data is being deleted.
Lock Mode (Parameter No. U04)
This function can be an assurance when you have to
leave the console unattended during breaks, for example.
It locks the panel switch and channel fader settings so
they can’t be changed. Panel settings that are not savable
to the scene memory such as the channel rotary controls,
EQ [ON] switch, HPF [ON] switch, etc., cannot be
locked.
1
Press [ENTER] after selecting the above display and
one of the displays shown below will appear: either
ON or OFF with flash on the parameter display
2
Use the [INC] and [DEC] keys to select either ON or
OFF.
3
Press the [ENTER] key and the following
confirmation message will appear. Press the alpha-
numeric [1] key to confirm your selection, or [3] to
abort the operation.
When the lock mode is turned on, the [UTILITY] switch
will be disengaged and “LOCK” will appear on the
message display. In this state the system is locked and
the only operation that can be performed is to engage the
[UTLILITY] switch and repeat the above procedure to
turn the lock mode off and restore normal operation.
E x e c u t i n g
D E L : O L D _ D A T A
S U R E ? Y : 1 N : 3
E x e c u t i n g
NOTE
Even while the lock mode is active scene recall operations can be
carried out from an external device. If fader and other settings are
changed while the lock mode is active the pre-lock settings will
be restored as soon as the lock mode is disengaged.
L O C K M O D E
L O C K : O N
L O C K : O F F
S U R E ? 1 : Y 3 : N
Summary of Contents for PM 5000 Series
Page 1: ...Owner s Manual E ...
